#  Register your Device

To connect devices to FlowFuse, you will needs a set of credentials and configuration information.

The best configuration to use will depend on how many devices you want to connect:

• Single Device Registration: for connecting a single device, or a small number of devices, to the platform.
• Bulk Registration: for setting up one or more devices which will automatically register themselves to the platform when the device agent is run.

#  Single Device Registration

For a single device, or small batch of devices, you can manually register each device individually, naming each device and assigning it to an application.

#  Generating "Device Configuration"

1. Go to your teams's Devices page.
2. Click the Add Device button.
3. You will be prompted to give the device a Name, an optional Type and to chose which Application, if any, the device should be assigned to.
   • 
   • The Type field can be used to record additional meta information about the device.
   • If you do not wish to assign the device to an Application at this time, you can do so later.
4. Click Add

Once the device has been registered, you will be shown the Device Configuration dialog which contains all the information needed to connect the device to the platform.

By default, you are offered the Setup command method that was introduced in FlowFuse V2.1, and provide a one-time passcode with which you can call the flowfuse-device-agent to connect to the platform and retrieve the relevant device configuration.

For older versions of the device agent, you can expand the the Manual Setup section and use the configuration data with the Device Agent Web UI or the Manual Download methods instead.

Repeat these steps for each device you want to connect to the platform.

#  Bulk Registration

If you have dozens, or hundreds of devices, you can use the Provisioning Configuration method. This approach provides you with a single "Provisioning Token" for all of your devices. When passed to the flowfuse-device-agent, this token will automatically register your devices with the relevant instance or application. There is no need to "Add Device" each time, as is the case with the Single Device Registration method.

#  Generating "Provisioning Configuration"

1. Go to your teams's Settings page.
2. Open the Device tab.
3. Click the Create Provisioning Token tab.
4. You will be prompted to give the token a name and to chose what instance, if any, the device should be assigned to.
5. Click Create

Once the Provisioning Token has been created, you will be shown the Device Provisioning Configuration dialog. This is the only time the platform will show you this information.

Make sure to take a copy or use the Download button to save the configuration file locally.

#  Connect the device

#  Install the configuration

Before you can connect a device to the platform, the device must have a Device Configuration file or a Device Provisioning Configuration file present in its working directory. There are three ways to do this:

• Setup Command: Copy the Setup Command (with one-time passcode) and run it in a terminal window on the device.
• Device Agent Web UI: Copy the configuration file (device.yml) to the device using its built in Web UI.
  • The Device Agent must be running and the command line flag for the Web UI must be enabled.
  • See Command Line Options for more information.
• Manual Download: Download the configuration file into the device's Working Directory.

#  Setup Command

The Setup Command method was introduced in FlowFuse V2.1. This is the fastest way to connect a device to the platform.

1. Copy the Setup command to the clipboard.
2. Open a terminal window to the device and paste or type in the command.
3. The device agent connect to the platform, retrieve the device configuration.

Upon completion, the terminal window will report that the device has connected to the platform and will output a new command for you to use to start the device agent with the new configuration.

NOTES

• The Setup command is only valid for 24h. If you do not use it within this time, you will need to regenerate it.
• The 3 word One-Time-Code (OTC) contained in the Setup command is single use and is deleted immediately upon use.

#  Device Agent Web UI

If the Device Agent is running with the Web UI enabled, you can download the configuration file to the device using the Web UI. This is useful if you don't have direct access to the device's file system. Once the configuration file is downloaded, the device agent will automatically restart and load the configuration.

#  Manual Download

Place the Device Configuration or Device Provisioning Configuration file on the device in the Working Directory

By default, the device agent expects the configuration file to be named device.yml, if not, you will need to start the device agent with the -c Command Line Option and specify the path of the configuration file.

The agent can then be started with the command: [^global-install]

flowfuse-device-agent

You will see the device start and perform a 'call-home' where it connects back to the platform to check what it should be running.

#  Additional Information

If you copy or download a Device Provisioning Configuration file to the device, you will see the device start and perform a 'call-home' where it connects back to the platform to auto register itself in the team devices. If successful, the real Device Configuration is generated and downloaded to the device. The original Provisioning Configuration will be overwritten meaning subsequent runs will not need to perform the auto registration again.

#  Assign the device

The next step is to assign the device to a Node-RED instance or application. Note, that if you've followed Single Device Registration or Bulk Reigstration to register your device, it will automatically be assigned to an Application or Instance.

#  Assign to Node-RED instance

To assign to a Node-RED instance:

1. Go to your teams's Devices page.
2. Open the dropdown menu to the right of the device you want to assign and select the Add to Instance option.
3. Select the instance in the dialog and click Add to continue.

#  Assign the device to an Application

If the device was not assigned to an application when it was registered, the next step is to assign it to a FlowFuse Application

1. Go to your teams's Devices page.
2. Open the dropdown menu to the right of the device you want to assign and select the Add to Application option.
3. Select the application in the dialog and click Add to continue.

#  Remove from Node-RED instance

To remove the device from a Node-RED instance:

1. Go to your teams's Devices page.
2. Open the dropdown menu to the right of the device you want to remove and select the Remove from Instance option.
3. Confirm the action by clicking the Remove option.

The device will stop running the current Node-RED flows. It will then wait until it is assigned to another instance.

#  Remove a device from an Application

To remove the device from an application:

1. Go to your teams's Devices page.
2. Open the dropdown menu to the right of the device you want to remove and select the Remove from Application option.
3. Confirm the action by clicking the Remove option.

The device will stop running the current Node-RED flows. It will then wait until it is assigned to another application or instance.

#  Regenerating Configurations

To regenerate device configurations:

1. Go to your team's or instance's Devices page.
2. Open the dropdown menu to the right of the device and select the Regenerate Configuration option.
3. You will need to confirm this action as the existing configuration will be immediately revoked. If the device tries to use the old configuration it will fail to connect and will delete its local copy of the snapshot it was running. Click Regenerate Configuration to continue.

You will then be shown the Device Configuration dialog again with a new setup command and the manual configuration to copy or download.

#  Deleting a device

To delete a device:

1. Go to your team's or instance's Devices page.
2. Open the dropdown menu to the right of the device and select the Delete device option.
3. Confirm the action by clicking the Delete option.

The next time the device attempts to connect to the platform it will find it is no longer authorised and will stop and delete its local copy of the flows it was running.

#  Node-RED Settings

Most Node-RED settings are managed by the platform as part of deploying an instance to the device. However some settings can be overridden locally on the device.

#  HTTPS configuration

Available in Device Agent 0.10+

The https configuration option in device.yml can be used to enable HTTPS within Node-RED. The values are passed through to the Node-RED https setting.

The ca, key and cert properties can be used to provide custom certificates and keys. The values should be set to the contents of the certificate/key.

Alternatively, the properties caPath, keyPath and certPath can be used instead to provide absolute paths to files containing the certificates/keys.

https:
   keyPath: /opt/flowfuse-device/certs/key.pem
   certPath: /opt/flowfuse-device/certs/cert.pem
   caPath: /opt/flowfuse-device/certs/ca.pem

#  httpStatic configuration

Available in Device Agent 0.10+

This option can be used to serve content from a local directory.

If set to a path, the files in that directory will be served relative to /.

httpStatic: /opt/flowfuse-device/static-content

It is also possible to configure it with a list of directories and the corresponding path they should be served from.

httpStatic:
  - path: /opt/flowfuse-device/static-content/images
    root: /images
  - path: /opt/flowfuse-device/static-content/js
    root: /js

#  Troubleshooting

If you have problems with the device agent the first thing to do is to enable the verbose logging mode.

To do this add a -v to the command line. This will present a lot more information about what the agent is doing. It will show that is has connected to the FlowFuse instance and every time it checks in, it will also log all the local HTTP requests made when accessing the Node-RED Editor via the FlowFuse application.